RP15 | Up to 25mm | Brush Seal | How To

Draught proofing your door with the RP15 Draught Excluder is simple. In this video, ecoMaster’s Technical Director, Maurice Beinat, demonstrates how to install the RP15 on a wooden internal door.

What you will need:

  • Alcohol wipes or microfibre cloth with methylated spirits
  • Measuring tape
  • Pencil
  • Side cutters or pliers
  • Hacksaw 

Pro Tips: 

  • Check the sweep of the door to make sure this is the right product for your home. 
  • Always cut the carrier and brush separately. This protects the brush so bristles won’t fall out.  [Learn More]
  • Once the parts are reassembled, use pliers to squeeze together the end of the carrier so the brush can’t slide out.
  • Surfaces must be clean and smooth to ensure good adhesion. If the bottom of the door is rough or not straight, then screw fixing is the best option.
  • Press firmly along the adhesive twice for a strong bond with the door surface.
  • Pair the RP15 with a door perimeter seal such as Draught Dodgers  or EMV Seal to seal the other 3 edges of the door (two sides and the top).
  • RP15 can be screw fixed.