RP57 | Up to 50mm Gap | Brush Seal | How To

What you will need:

  • Alcohol wipes or microfibre cloth with methylated spirits
  • Measuring tape
  • Pencil
  • Side cutters or pliers
  • Hacksaw 

    How to Install:
    [Note: This video describes how to install an different brush seal - but the process to install an RP57 is exactly the same]. 

     Pro Tips: 

    • Check the sweep of the door to make sure this is the right product for your home. 
    • Always cut the carrier and brush separately. This protects the brush so bristles won’t fall out.  [Learn More]
    • Once the parts are reassembled, use pliers to squeeze together the end of the carrier so the brush can’t slide out.
    • Surfaces must be clean and smooth to ensure good adhesion. If the bottom of the door is rough or not straight, then screw fixing is the best option.
    • Press firmly along the adhesive twice for a strong bond with the door surface.
    • Pair the RP57 with a door perimeter seal such as Draught Dodgers  or EMV Seal to seal the other 3 edges of the door (two sides and the top).