Aluminium Sliding Door Seals | EMV Slim Line - How To

Stop Draughts in Minutes with EMV Door Seal Strips for Aluminium Sliding Doors

The EMV slim line seal provides a simple and low cost solution for keeping draughts out of your home or rental, in turn helping to improve comfort and energy efficiency. The seal is installed along the bottom and top edges of sliding aluminium doors. For extra draught-proofing and to prevent your door from rattling, you can use a seal in the door jamb as well. It's easy to DIY and you can call us for help if you run into difficulty.

What you will need:

* Tape measure
* Cleaning cloth
* Scissors
* Butter knife

Hacks:

* Before installing the seal, always clean the part of door where it will be fitted.
* After installation, use a butter knife to press the seal onto the door, to ensure the adhesive sticks to it properly.
* If installing a seal in the door jamb, make sure to fold it over before inserting it

Find Out More:

EecoMaster’s Technical Director, Maurice Beinat, shows you how to install the seal yourself from start to finish, in our step by-step instructional video.

Check it out here.

Neat Solution

So far I have found the Draught Dodgers fairly easy to install on my casement windows. I have quite a few to install so I invested in a proper mitre saw which enables me to make perfect 90 degree cuts and also 75 degree cuts to match the angle of the bevel. This allows me to use all the off-cuts as there is more than enough wood for each window. I stained & varnished all the lengths first before installing and now have a really professional looking job.

Hi Allan,

We're delighted to hear that the installation of your Draught Dodgers for Awning Windows has been a straight forward one. Making that investment into a mitre saw really does make the process so much easier - go you!

Thank you so much for sharing your feedback, we really appreciate it!

Also, we would LOVE to see a photo of your completed install too. Please feel free to send them through to sales@ecomaster.com.au
Have a great day!

Works really well
Highly recommend

Hi Glen,

We are immensely pleased to hear that you found our DraftStoppa to your liking so much so, that you would recommend it to others. Thank you!
We look forward to serving you again soon!

Excellent door seal

Good quality and very clever design. I had my handyman help me to install it, and he said the video was easy to follow. The little piece of board that helps the installer measure the width of the rubber seal made all the difference, he said. Also, great service from Eco master when I rang with questions before I purchased

Hi Kate,

we sincerely thank you for your encouraging words and positive feedback. It is great to know that you and your handy man love our 'Draught Dodgers for Doors'.
The team here at ecoMaster put a lot of effort into the videos to help make the install process as simple as possible. We will definitely be sharing your feedback with them. Thanks again!

Easy to install

I installed 2 small and 1 large pelmet above 3 different windows. It was easy to do, although a join on the big one fell apart once, so make sure you stick it down really hard. They really are invisible which I like, as I find box pelmets too heavy.

We are quite thrilled that you like our 'Invisible Pelmets'! Good point about 'sticking down hard', it is the best way to active any adhesive tape.
We hope you visit again soon! Have a great day!

Goodbye Heating Vents

Cutting the boards to size was easy and installing the units was also straightforward.
The return unit was a bit fiddly due to it being a long oblong with an angled and uneven top but used the offcut board pieces to make a level surface and lots of filler.
Units are a bit pricey.

Hi Robin,

We take pride in the fact that you took your time to write to us. This helps us strive for the best experience for customers like yourself.
We are so pleased to hear that the installation process of our 'Goodbye Heating Vents' was a simple one.

With rising costs across the board, sourcing the components unfortunately isn't as cost effective as it use to be. Providing a convenient one stop kit to de-commission old heating vents and save money on energy bills, we hope is worth it. As a small family business that is committed to energy efficiency for Australian homes we do keep our margins very slim.

Thanks again for sharing. Have a fantastic day!

Aluminium Sliding Door Seals | EMV Slim Line - How To

Let customers speak for us