RP1 - Fluffy Roller | Over Carpet | How To
The RP1 door draught excluder sits in two slotted hooks fitted to the back of your door. It rolls across the floor as your door opens and closes. The RP1 moves up and down as the floor level changes. The clever design allows the soft roller to seal gaps so draughts can’t sneak into your room.
What you will need:
- Pencil
- Measuring tape
- Sharp knife
- Drill fitted with 2.5mm drill bit
Hacks:
- The roller has one solid end and one soft end. The soft end sits at the hinge side of the door.
- Trim the soft end to length with a sharp knife blade, turning the roller as you cut to ensure a straight edge.
- Mark where hooks are screwed into the door then use a 2.5mm drill bit to pre-drill holes. This may not be necessary for softwood doors.
Find Out More:
Maurice provides you with step-by-step instructions on how to cut and install the RP1 in this video.