The ecoMasterStore is always open!!
AusPost orders are despatched daily.
Preston Collections are Tuesdays & Fridays 8am until 3pm.

Door Threshold Plate (RP4B) - FAQ

Frequently Asked Questions:


Q: What is the Raven RP4B threshold plate made of?
A: The Raven RP4B threshold plate is made of high-quality anodised aluminium which ensures its durability and resistance to wear and tear over time.

 

Q: How does the Raven RP4B threshold plate help prevent air and water leakages?
A: How does the Raven RP4B threshold plate help prevent air and water leakages?

 

Q: How is the RP4B fixed to a hardwood threshold? 
A: After cutting the RP4B to length, use a pencil to mark the screw points on the threshold. Ensure you pilot drill the threshold with a 3.5mm drill bit so that the screws are more easily fitted.

 

Q: How can the RP4B be fixed onto a stone threshold?
A: Once the RP4B is cut to length, place it on the threshold and mark the screw points with a nail and hammer through the fixing points. Remove the RP4B from the threshold. Using a 6mm masonry drill bit, drill each fixing point for sufficient depth to take the fixing screw. Fill each hole with red spaghetti or similar, put the RP4B in place and fit the fixing screws into the red spaghetti. If the stone threshold is not flat, be sure to fix carpenter's packers under the RP4B such that as the screws are tightened, the treadplate remains flat.