Polyester Underfloor Insulation | Specs
| R2.5 | |
|
Cover |
9.0 |
|
Rolls |
2 |
|
Width |
450 |
|
Dimensions |
10,000 x 450 |
100% Polyester - Made in Australia
45% - 85% recycled plastic bottles
Not sure where to start?
Try these collections:
| R2.5 | |
|
Cover |
9.0 |
|
Rolls |
2 |
|
Width |
450 |
|
Dimensions |
10,000 x 450 |
100% Polyester - Made in Australia
45% - 85% recycled plastic bottles
Really easy to install underneath the floor, definitely get the pro stapling pack and more staples that you think you’ll need. Definitely have noticed as a difference in the house temperature after installing the insulation.
Really happy that we did it ourselves compared to the big quotes we got. My partner I did it over two weekends, it was annoying but not the worst thing in the world. If you have a low crawlspace, definitely get some yoga mats to lay down in your work area. They are an absolute game changer. Get at least 10 from Kmart or something and a good head torch and mask, the poly flooring doesn’t make you cough but all the dust and other surprises below will make you cough.
Hi Wilson, thanks so much for sharing your experience! We're thrilled to hear the insulation made a difference in your home. Great tip about the yoga mats and safety gear - helpful for others tackling similar projects!
Ecomaster provided an excellent product and service from initial enquiry to product delivery and ongoing advice. I am a DIY first time installer of the underfloor insulation. Michael provided excellent advice and guidance. He is extremely knowledgeable of the product, the tools (staple guns), and energy efficiency and insulation more broadly. He was able to guide me through the installation and offer some helpful hints to speed up the process, e.g., laying sheeting down to avoid dirt getting into the eyes, among others. He and a colleague was able to give me an accurate estimate of the amount of Ploy underfloor insulation. I had to ring back and revise the estimate down. No problem. There no wastage. I rang Michael a couple of times to seek advice with the insulation. He was patient, and expertise on how to place the insulation over the bearers and the direction to place the insulation. This advice and his encouragement (this is not the most pleasant job you will do) was helpful and meant I stayed the course and completed the job in some difficult, tight places. All up, I would HIGHLY recommend Ecomaster.
Hi David,
thank you for sharing your positive experience with ecoMaster. We’re delighted to hear that Michael’s guidance and our product met your expectations and supported your project. Your recommendation really means a lot to us. Wishing you success with future projects!
I purchased 5 of the EMV slimline door seals. Only one door required a bit of sanding to ensure correct fitment of the product. Follow the YouTube DIY installation video and you can't go wrong. Quick and easy. Highly recommend.
Thank you for your positive feedback Trevor! We're glad the seals and installation guidance worked well for you. Enjoy your improved doors!