DIY ecoGlaze On Sash | Fit and Finish Kit

DIY ecoGlaze requires you to have good attention to detail and the ability to closely follow our step-by-step guide videos to achieve successful insulation.

There are 3 steps to installing ecoGlaze. Each step is detailed in a separate video. It is essential you watch all 3 videos before you begin your order in readiness to DIY install.

DIY On-Sash requires 1 x On Sash Fit and Finish Kit per panel of glass 

Step 1. Preparation

1. Measuring the top and bottom of your Window. 
2. Cutting the top and bottom mouldings to size 
3. Cleaning the Window in Readiness for ecoGlaze 

Step 2. Installing the Mouldings

1. Install the Mini Seal to the Perimeter
2. Install the Bottom Moulding and Acrylic Supports
3. Install Top Moulding
4. Measure the side Mouldings 
5. Cut the Side Mouldings
6. Install the Left Hand Moulding 
7. Install the Right Hand Moulding 
8. Fit End Caps from the On-Sash Fit and Finish Kit to the Mouldings. We found this step is easiest when completed with steps 6 and 7

Step 3. Installing the Acrylic

1. Remove Mouldings from window 
2. Double Check the size 
3. Remove liner from the Acrylic
4. Put Acrylic in place and replace mouldings over the top to secure it in place.

Q: Can I collect my order?
A: Yes you can!  A “Ready for Pickup” email will be sent to you when you order is ready to be collected.  Please click this link for the Click and Collect details.  Note:  this Collection Centre is in Preston in Victoria, NOT Prestons in NSW. 

Q: When will my order be despatched?
A: Generally, your order will be despatched within 1 to 3 business days.    

Q: How will my order be delivered?
A: Depending upon the size of your order, it will be shipped either by AusPost or a specialist courier (note this is NOT an express courier).

Q: Will my order be tracked?
A: Yes!  When your order is consigned, you will receive a tracking number that will show you where your order is and its expected delivery date. 

AusPost - Track your order here
Specialist Courier - Track your order here

Please note: Orders with two or more items may arrive in separate parcels with no additional shipping charge

Q:  When will my order be delivered?
A: All AusPost orders are picked, packed and despatched within 2 business days.  Our experience with AusPost indicates that your order will be delivered within 2 - 5 business days.  Clearly this will fluctuate at peak shipping times such as Christmas and EOFY.

If your have selected the specialist courier, your order will be packed and despatched within 3 business days.  Please note, this is a specialist courier - NOT an express courier.  The courier will NOT get your order to your home faster, but it will deliver over-sized items that AusPost cannot deliver. 

Q: What happens if my order gets lost during transit?
A: On rare occasions we have had orders go missing. ecoMaster has solid procedures in place and photograph every order that leaves our warehouse.  The delivery of our orders at our local post office are videoed and we track the progress of orders.  If a delivery date appears to be beyond expectation, we will raise a query with the freighter on your behalf.  If your order cannot be found during transit, we will send a replacement.  

Q: What happens if my order is stolen after delivery?
A: We will check with the freighter to ensure that the order was delivered to the correct address.  If that is confirmed, and your order has been stolen from your home after delivery, please raise a Police Report.  In practice, we have had very little of this type of incident. 

Q: I’m not really sure how or where to start?  
A: That is no problem at all. To understand ecoGlaze, it would be best to go to www.ecoGlaze.com.au and start reading and watching the videos.  

Q: Do I need the Fit and Finish kit to be able to install DIY ecoGlaze On Sash?
A: Yes, Specifically the Acrylic Supports are an essential and required part for a successful ecoGlaze On Sash Installation. Without them there is nothing to hold the acrylic up and it is liable to fall off.

Q: What is DIY ecoGlaze On Sash? 
A: There are three different types of ecoGlaze, each designed for a specific type of window. DIY ecoGlaze On Sash is specifically for hinged windows and doors.  

Q: How many Fit and Finish Kits do I need for my windows?

A: You need one Fit and Finish kit for each Lite of your window that is using the On Sash moulding. That is every piece of glass that you are buying the On Sash Mouldings for, needs a Fit and Finish Kit.  

Q: I plan to purchase the Timber On Sash and paint it white to suit my window. Can I use the White Fit and Finish Kit for timber On Sash Mouldings?
A: No. The White Aluminium On Sash Mouldings and the Raw Timber On Sash Mouldings are slightly different in size. So if you plan to use the timber mouldings, regardless of the colour you are going to paint the mouldings, be sure to select the Brown Fit and Finish Kit. Likewise, purchase the White Kit for White Aluminum On Sash mouldings. The plastic coloured end caps are paintable.

Q: What paint should I use to paint the PLA End Caps?
A: Paints vary in makeup based on their solvent. The most common ones are oils, enamels, lacquers, and acrylics, most of which will work well with PLA. Enamel Paint is ideal for the Aluminium On Sash Moulding due to its higher bond strength. Acrylic paints are better for the Timber On Sash Mouldings usually because they are water based, which makes them dry faster and easier to use/clean up.