External Door Draught Proofing Kit | Specs

Maximum gap from jamb to face of the door is 10mm
Maximum bottom gap is 16mm. If it is more than that, add a tread plate.
Maximum door width is 920mm

Colour	Draught Dodgers for Doors	Draught Excluder RP3
Raw/Bronze	1 x square cut 1.1m (Head) 1 x angle cut 2.35m (Left) 1 x angle cut 2.35m (Right)	1 x RP3 (920mm) Bronze
White Aluminium/Silver	1 x square cut 1.1m (Head) 1 x angle cut 2.35m (Left) 1 x angle cut 2.35m (Right)	1 x RP3 (920mm) Silver
Black Aluminium/Black	1 x square cut 1.1m (Head) 1 x angle cut 2.35m (Left) 1 x angle cut 2.35m (Right)	1 x RP3 (920mm) Black

Draught Dodgers Moulding Profile:

Raw Timber Moulding Material:

“Tassie Oak” range of select grade Australian hardwood species

White Aluminium Moulding Material:

Powder Coated Aluminium in White - with white compression seals

Black Aluminium Moulding Material:

Powder Coated Aluminium in Black - with black compression seals

Dodger for Doors Seal Profile:

Gap Size:

Covers a gap from jamb edge to door face of up to 10mm.
Moulding can be fitted to suit varying width gaps

Made In: Australia

84%

(565)

(60)

(29)

(6)

(11)

Value Poly Underfloor Insulation

Ecomaster provided an excellent product and service from initial enquiry to product delivery and ongoing advice. I am a DIY first time installer of the underfloor insulation. Michael provided excellent advice and guidance. He is extremely knowledgeable of the product, the tools (staple guns), and energy efficiency and insulation more broadly. He was able to guide me through the installation and offer some helpful hints to speed up the process, e.g., laying sheeting down to avoid dirt getting into the eyes, among others. He and a colleague was able to give me an accurate estimate of the amount of Ploy underfloor insulation. I had to ring back and revise the estimate down. No problem. There no wastage. I rang Michael a couple of times to seek advice with the insulation. He was patient, and expertise on how to place the insulation over the bearers and the direction to place the insulation. This advice and his encouragement (this is not the most pleasant job you will do) was helpful and meant I stayed the course and completed the job in some difficult, tight places. All up, I would HIGHLY recommend Ecomaster.

Hi David,

thank you for sharing your positive experience with ecoMaster. We’re delighted to hear that Michael’s guidance and our product met your expectations and supported your project. Your recommendation really means a lot to us. Wishing you success with future projects!

Simple and effective.

I purchased 5 of the EMV slimline door seals. Only one door required a bit of sanding to ensure correct fitment of the product. Follow the YouTube DIY installation video and you can't go wrong. Quick and easy. Highly recommend.

Thank you for your positive feedback Trevor! We're glad the seals and installation guidance worked well for you. Enjoy your improved doors!

Valve cosy is making a difference.

Definitely reduces heat loss at the valve. Heat loss can be further reduced by adding insulation to the copper pipe below the valve cosy.
Quick and easy.

Hi Trevor,

We love hearing that the valve cosy is making a difference. Your tip about adding insulation to the pipe is helpful. Feel free to reach out if you need further assistance.

1 2 3

Your cart is currently empty.

External Door Draught Proofing Kit | Specs

Let customers speak for us